PSQL(1)

NAME
psql - PostgreSQL interactive terminal

SYNOPSIS

psql [option...] [dbname [username]]

DESCRIPTION

psql is a terminal-based front-end to PostgreSQL. It enables you to type in queries interactively, issue them to PostgreSQL, and see the query results. Alternatively, input can be from a file. In addition, it provides a number of meta-commands and various shell-like features to facilitate writing scripts and automating a wide variety of tasks.

OPTIONS

-a, --echo-all
    Print all nonempty input lines to standard output as they are read. (This does not apply to lines read interactively.) This is equivalent to setting the variable ECHO to all.

-A, --no-align
    Switches to unaligned output mode. (The default output mode is otherwise aligned.)

-c command, --command=command
    Specifies that psql is to execute one command string, command, and then exit. This is useful in shell scripts. Start-up files (psqlrc and ~/.psqlrc) are ignored with this option.

    command must be either a command string that is completely parsable by the server (i.e., it contains no psql-specific features), or a single backslash command. Thus you cannot mix SQL and psql meta-commands with this option. To achieve that, you could pipe the string into psql, for example: echo '\x \\ SELECT * FROM foo;' | psql. (\\ is the separator meta-command.)

    If the command string contains multiple SQL commands, they are processed in a single transaction, unless there are explicit BEGIN/COMMIT commands included in the string to divide it into multiple transactions. This is different from the behavior when the same string is fed to psql's standard input. Also, only the result of the last SQL command is returned.

    Because of these legacy behaviors, putting more than one command in the -c string often has unexpected results. It's better to feed multiple commands to psql's standard input, either using echo as illustrated above, or via a shell here-document, for example:

        psql <<EOF
        \x
        SELECT * FROM foo;
        EOF

-d dbname, --dbname=dbname
    Specifies the name of the database to connect to. This is equivalent to specifying dbname as the first non-option argument on the command line.

    If this parameter contains an = sign, it is treated as a conninfo string. See Section 31.1, “Database Connection Control Functions”, in the documentation for more information.

-e, --echo-queries
    Copy all SQL commands sent to the server to standard output as well. This is equivalent to setting the variable ECHO to queries.

-E, --echo-hidden
    Echo the actual queries generated by \d and other backslash commands. You can use this to study psql's internal operations. This is equivalent to setting the variable ECHO_HIDDEN to on.

-f filename, --file=filename
    Use the file filename as the source of commands instead of reading commands interactively. After the file is processed, psql terminates. This is in many ways equivalent to the internal command \i.

    If filename is - (hyphen), then standard input is read until an EOF indication or \q meta-command. Note however that Readline is not used in this case (much as if -n had been specified).

    Using this option is subtly different from writing psql < filename. In general, both will do what you expect, but using -f enables some nice features such as error messages with line numbers. There is also a slight chance that using this option will reduce the start-up overhead. On the other hand, the variant using the shell's input redirection is (in theory) guaranteed to yield exactly the same output you would have received had you entered everything by hand.

-F separator, --field-separator=separator
    Use separator as the field separator for unaligned output. This is equivalent to \pset fieldsep or \f.

-h hostname, --host=hostname
    Specifies the host name of the machine on which the server is running. If the value begins with a slash, it is used as the directory for the Unix-domain socket.

-H, --html
    Turn on HTML tabular output. This is equivalent to \pset format html or the \H command.

-l, --list
    List all available databases, then exit. Other non-connection options are ignored. This is similar to the internal command \list.

-L filename, --log-file=filename
    Write all query output into file filename, in addition to the normal output destination.

-n, --no-readline
    Do not use Readline for line editing and do not use the command history. This can be useful to turn off tab expansion when cutting and pasting.

-o filename, --output=filename
    Put all query output into file filename. This is equivalent to the command \o.

-p port, --port=port
    Specifies the TCP port or the local Unix-domain socket file extension on which the server is listening for connections. Defaults to the value of the PGPORT environment variable or, if not set, to the port specified at compile time, usually 5432.

-P assignment, --pset=assignment
    Specifies printing options, in the style of \pset. Note that here you have to separate name and value with an equal sign instead of a space. For example, to set the output format to LaTeX, you could write -P format=latex.

-q, --quiet
    Specifies that psql should do its work quietly. By default, it prints welcome messages and various informational output. If this option is used, none of this happens. This is useful with the -c option. This is equivalent to setting the variable QUIET to on.

-R separator, --record-separator=separator
    Use separator as the record separator for unaligned output. This is equivalent to the \pset recordsep command.

-s, --single-step
    Run in single-step mode. That means the user is prompted before each command is sent to the server, with the option to cancel execution as well. Use this to debug scripts.

-S, --single-line
    Runs in single-line mode where a newline terminates an SQL command, as a semicolon does.

        Note
        This mode is provided for those who insist on it, but you are not necessarily encouraged to use it. In particular, if you mix SQL and meta-commands on a line the order of execution might not always be clear to the inexperienced user.

-t, --tuples-only
    Turn off printing of column names and result row count footers, etc. This is equivalent to the \t command.

-T table_options, --table-attr=table_options
    Specifies options to be placed within the HTMLtable tag. See \pset for details.

-U username, --username=username
    Connect to the database as the user username instead of the default. (You must have permission to do so, of course.)

-v assignment, --set=assignment, --variable=assignment
    Perform a variable assignment, like the \set internal command. Note that you must separate name and value, if any, by an equal sign on the command line. To unset a variable, leave off the equal sign. To just set a variable without a value, use the equal sign but leave off the value. These assignments are done during a very early stage of start-up, so variables reserved for internal purposes might get overwritten later.

-V, --version
    Print the psql version and exit.

-w, --no-password
    Never issue a password prompt. If the server requires password authentication and a password is not available by other means such as a .pgpass file, the connection attempt will fail. This option can be useful in batch jobs and scripts where no user is present to enter a password.

    Note that this option will remain set for the entire session, and so it affects uses of the meta-command \connect as well as the initial connection attempt.

-W, --password
    Force psql to prompt for a password before connecting to a database.

    This option is never essential, since psql will automatically prompt for a password if the server demands password authentication. However, psql will waste a connection attempt finding out that the server wants a password. In some cases it is worth typing -W to avoid the extra connection attempt.

    Note that this option will remain set for the entire session, and so it affects uses of the meta-command \connect as well as the initial connection attempt.

-x, --expanded
    Turn on the expanded table formatting mode. This is equivalent to the \x command.

-X,, --no-psqlrc
    Do not read the start-up file (neither the system-wide psqlrc file nor the user's ~/.psqlrc file).

-1, --single-transaction
    When psql executes a script with the -f option, adding this option wraps BEGIN/COMMIT around the script to execute it as a single transaction. This ensures that either all the commands complete successfully, or no changes are applied.

    If the script itself uses BEGIN, COMMIT, or ROLLBACK, this option will not have the desired effects. Also, if the script contains any command that cannot be executed inside a transaction block, specifying this option will cause that command (and hence the whole transaction) to fail.

-?, --help
    Show help about psql command line arguments, and exit.

EXIT STATUS

psql returns 0 to the shell if it finished normally, 1 if a fatal error of its own occurs (e.g. out of memory, file not found), 2 if the connection to the server went bad and the session was not interactive, and 3 if an error occurred in a script and the variable ON_ERROR_STOP was set.

USAGE

  Connecting to a Database

psql is a regular PostgreSQL client application. In order to connect to a database you need to know the name of your target database, the host name and port number of the server, and what user name you want to connect as. psql can be told about those parameters via command line options, namely -d, -h, -p, and -U respectively. If an argument is found that does not belong to any option it will be interpreted as the database name (or the user name, if the database name is already given). Not all of these options are required; there are useful defaults. If you omit the host name, psql will connect via a Unix-domain socket to a server on the local host, or via TCP/IP to localhost on machines that don't have Unix-domain sockets. The default port number is determined at compile time. Since the database server uses the same default, you will not have to specify the port in most cases. The default user name is your operating-system user name, as is the default database name. Note that you cannot just connect to any database under any user name. Your database administrator should have informed you about your access rights.

When the defaults aren't quite right, you can save yourself some typing by setting the environment variables PGDATABASE, PGHOST, PGPORT and/or PGUSER to appropriate values. (For additional environment variables, see Section 31.13, “Environment Variables”, in the documentation.) It is also convenient to have a ~/.pgpass file to avoid regularly having to type in passwords. See Section 31.14, “The Password File”, in the documentation for more information.

An alternative way to specify connection parameters is in a conninfo string, which is used instead of a database name. This mechanism give you very wide control over the connection. For example:

    $ psql "service=myservice sslmode=require"

This way you can also use LDAP for connection parameter lookup as described in Section 31.16, “LDAP Lookup of Connection Parameters”, in the documentation. See Section 31.1, “Database Connection Control Functions”, in the documentation for more information on all the available connection options.

If the connection could not be made for any reason (e.g., insufficient privileges, server is not running on the targeted host, etc.), psql will return an error and terminate.

If at least one of standard input or standard output are a terminal, then psql sets the client encoding to “auto”, which will detect the appropriate client encoding from the locale settings (LC_CTYPE environment variable on Unix systems). If this doesn't work out as expected, the client encoding can be overridden using the environment variable PGCLIENTENCODING.

  Entering SQL Commands

In normal operation, psql provides a prompt with the name of the database to which psql is currently connected, followed by the string =>. For example:

    $ psql testdb
    psql (9.1.21)
    Type "help" for help.
    testdb=>

At the prompt, the user can type in SQL commands. Ordinarily, input lines are sent to the server when a command-terminating semicolon is reached. An end of line does not terminate a command. Thus commands can be spread over several lines for clarity. If the command was sent and executed without error, the results of the command are displayed on the screen.

Whenever a command is executed, psql also polls for asynchronous notification events generated by LISTEN(7) and NOTIFY(7).

  Meta-Commands

Anything you enter in psql that begins with an unquoted backslash is a psql meta-command that is processed by psql itself. These commands make psql more useful for administration or scripting. Meta-commands are often called slash or backslash commands.

The format of a psql command is the backslash, followed immediately by a command verb, then any arguments. The arguments are separated from the command verb and each other by any number of whitespace characters.

To include whitespace into an argument you can quote it with a single quote. To include a single quote into such an argument, use two single quotes. Anything contained in single quotes is furthermore subject to C-like substitutions for \n (new line), \t (tab), \digits (octal), and \xdigits (hexadecimal).

If an unquoted argument begins with a colon (:), it is taken as a psql variable and the value of the variable is used as the argument instead. If the variable name is surrounded by single quotes (e.g. :'var'), it will be escaped as an SQL literal and the result will be used as the argument. If the variable name is surrounded by double quotes, it will be escaped as an SQL identifier and the result will be used as the argument.

Arguments that are enclosed in backquotes (`) are taken as a command line that is passed to the shell. The output of the command (with any trailing newline removed) is taken as the argument value. The above escape sequences also apply in backquotes.

Some commands take an SQL identifier (such as a table name) as argument. These arguments follow the syntax rules of SQL: Unquoted letters are forced to lowercase, while double quotes (") protect letters from case conversion and allow incorporation of whitespace into the identifier. Within double quotes, paired double quotes reduce to a single double quote in the resulting name. For example, FOO"BAR"BAZ is interpreted as fooBARbaz, and "A weird"" name" becomes A weird" name.

Parsing for arguments stops at the end of the line, or when another unquoted backslash is found. An unquoted backslash is taken as the beginning of a new meta-command. The special sequence \\ (two backslashes) marks the end of arguments and continues parsing SQL commands, if any. That way SQL and psql commands can be freely mixed on a line. But in any case, the arguments of a meta-command cannot continue beyond the end of the line.

The following meta-commands are defined:

\a
    If the current table output format is unaligned, it is switched to aligned. If it is not unaligned, it is set to unaligned. This command is kept for backwards compatibility. See \pset for a more general solution.

\c or \connect [ dbname [ username ] [ host ] [ port ] ] | conninfo
    Establishes a new connection to a PostgreSQL server. The connection parameters to use can be specified either using a positional syntax, or using conninfo connection strings as detailed in Section 31.1, “Database Connection Control Functions”, in the documentation.

    When using positional parameters, if any of dbname, username, host or port are omitted or specified as -, the value of that parameter from the previous connection is used; if there is no previous connection, the libpq default for the parameter's value is used. When using conninfo strings, no values from the previous connection are used for the new connection.

    If the new connection is successfully made, the previous connection is closed. If the connection attempt failed (wrong user name, access denied, etc.), the previous connection will only be kept if psql is in interactive mode. When executing a non-interactive script, processing will immediately stop with an error. This distinction was chosen as a user convenience against typos on the one hand, and a safety mechanism that scripts are not accidentally acting on the wrong database on the other hand.

    Examples:

        => \c mydb myuser host.dom 6432
        => \c service=foo
        => \c "host=localhost port=5432 dbname=mydb connect_timeout=10 sslmode=disable"

\C [ title ]
    Sets the title of any tables being printed as the result of a query or unset any such title. This command is equivalent to \pset title title. (The name of this command derives from “caption”, as it was previously only used to set the caption in an HTML table.)

\cd [ directory ]
    Changes the current working directory to directory. Without argument, changes to the current user's home directory.

        Tip
        To print your current working directory, use \! pwd.

\conninfo
    Outputs information about the current database connection.

\copy { table [ ( column_list ) ] | ( query ) } { from | to } { filename | stdin | stdout | pstdin | pstdout } [ with ] [ binary ] [ oids ] [ delimiter [ as ] 'character' ] [ null [ as ] 'string' ] [ csv [ header ] [ quote [ as ] 'character' ] [ escape [ as ] 'character' ] [ force quote column_list | * ] [ force not null column_list ] ]
    Performs a frontend (client) copy. This is an operation that runs an SQLCOPY(7) command, but instead of the server reading or writing the specified file, psql reads or writes the file and routes the data between the server and the local file system. This means that file accessibility and privileges are those of the local user, not the server, and no SQL superuser privileges are required.

    The syntax of the command is similar to that of the SQLCOPY(7) command. Note that, because of this, special parsing rules apply to the \copy command. In particular, the variable substitution rules and backslash escapes do not apply.

    \copy ... from stdin | to stdout reads/writes based on the command input and output respectively. All rows are read from the same source that issued the command, continuing until \. is read or the stream reaches EOF. Output is sent to the same place as command output. To read/write from psql's standard input or output, use pstdin or pstdout. This option is useful for populating tables in-line within a SQL script file.

        Tip
        This operation is not as efficient as the SQLCOPY command because all data must pass through the client/server connection. For large amounts of data the SQL command might be preferable.

\copyright
    Shows the copyright and distribution terms of PostgreSQL.

\d[S+] [ pattern ]
    For each relation (table, view, index, sequence, or foreign table) or composite type matching the pattern, show all columns, their types, the tablespace (if not the default) and any special attributes such as NOT NULL or defaults. Associated indexes, constraints, rules, and triggers are also shown. For foreign tables, the associated foreign server is shown as well. (“Matching the pattern” is defined in Patterns below.)

    The command form \d+ is identical, except that more information is displayed: any comments associated with the columns of the table are shown, as is the presence of OIDs in the table, the view definition if the relation is a view, and the generic options if the relation is a foreign table.

    By default, only user-created objects are shown; supply a pattern or the S modifier to include system objects.

        Note
        If \d is used without a pattern argument, it is equivalent to \dtvsE which will show a list of all visible tables, views, sequences and foreign tables. This is purely a convenience measure.

\da[S] [ pattern ]
    Lists aggregate functions, together with their return type and the data types they operate on. If pattern is specified, only aggregates whose names match the pattern are shown. By default, only user-created objects are shown; supply a pattern or the S modifier to include system objects.

\db[+] [ pattern ]
    Lists tablespaces. If pattern is specified, only tablespaces whose names match the pattern are shown. If + is appended to the command name, each object is listed with its associated permissions.

\dc[S] [ pattern ]
    Lists conversions between character-set encodings. If pattern is specified, only conversions whose names match the pattern are listed. By default, only user-created objects are shown; supply a pattern or the S modifier to include system objects.

\dC [ pattern ]
    Lists type casts. If pattern is specified, only casts whose source or target types match the pattern are listed.

\dd[S] [ pattern ]
    Shows the descriptions of objects matching the pattern, or of all visible objects if no argument is given. But in either case, only objects that have a description are listed. By default, only user-created objects are shown; supply a pattern or the S modifier to include system objects. “Object” covers aggregates, functions, operators, types, relations (tables, views, indexes, sequences), large objects, rules, and triggers. For example:

        => \dd version
                             Object descriptions
           Schema   |  Name   |  Object  |        Description
        ------------+---------+----------+---------------------------
         pg_catalog | version | function | PostgreSQL version string
        (1 row)

    Descriptions for objects can be created with the COMMENT(7)SQL command.

\ddp [ pattern ]
    Lists default access privilege settings. An entry is shown for each role (and schema, if applicable) for which the default privilege settings have been changed from the built-in defaults. If pattern is specified, only entries whose role name or schema name matches the pattern are listed.

    The ALTER DEFAULT PRIVILEGES (ALTER_DEFAULT_PRIVILEGES(7)) command is used to set default access privileges. The meaning of the privilege display is explained under GRANT(7).

\dD[S] [ pattern ]
    Lists domains. If pattern is specified, only domains whose names match the pattern are shown. By default, only user-created objects are shown; supply a pattern or the S modifier to include system objects.

\dE[S+] [ pattern ], \di[S+] [ pattern ], \ds[S+] [ pattern ], \dt[S+] [ pattern ], \dv[S+] [ pattern ]
    In this group of commands, the letters E, i, s, t, and v stand for foreign table, index, sequence, table, and view, respectively. You can specify any or all of these letters, in any order, to obtain a listing of objects of these types. For example, \dit lists indexes and tables. If + is appended to the command name, each object is listed with its physical size on disk and its associated description, if any. If pattern is specified, only objects whose names match the pattern are listed. By default, only user-created objects are shown; supply a pattern or the S modifier to include system objects.

\des[+] [ pattern ]
    Lists foreign servers (mnemonic: “external servers”). If pattern is specified, only those servers whose name matches the pattern are listed. If the form \des+ is used, a full description of each server is shown, including the server's ACL, type, version, and options.

\det[+] [ pattern ]
    Lists foreign tables (mnemonic: “external tables”). If pattern is specified, only entries whose table name or schema name matches the pattern are listed. If the form \det+ is used, generic options are also displayed.

\deu[+] [ pattern ]
    Lists user mappings (mnemonic: “external users”). If pattern is specified, only those mappings whose user names match the pattern are listed. If the form \deu+ is used, additional information about each mapping is shown.

        Caution
        \deu+ might also display the user name and password of the remote user, so care should be taken not to disclose them.

\dew[+] [ pattern ]
    Lists foreign-data wrappers (mnemonic: “external wrappers”). If pattern is specified, only those foreign-data wrappers whose name matches the pattern are listed. If the form \dew+ is used, the ACL and options of the foreign-data wrapper are also shown.

\df[antwS+] [ pattern ]
    Lists functions, together with their arguments, return types, and function types, which are classified as “agg” (aggregate), “normal”, “trigger”, or “window”. To display only functions of specific type(s), add the corresponding letters a, n, t, or w to the command. If pattern is specified, only functions whose names match the pattern are shown. If the form \df+ is used, additional information about each function, including volatility, language, source code and description, is shown. By default, only user-created objects are shown; supply a pattern or the S modifier to include system objects.

        Tip
        To look up functions taking arguments or returning values of a specific type, use your pager's search capability to scroll through the \df output.

\dF[+] [ pattern ]
    Lists text search configurations. If pattern is specified, only configurations whose names match the pattern are shown. If the form \dF+ is used, a full description of each configuration is shown, including the underlying text search parser and the dictionary list for each parser token type.

\dFd[+] [ pattern ]
    Lists text search dictionaries. If pattern is specified, only dictionaries whose names match the pattern are shown. If the form \dFd+ is used, additional information is shown about each selected dictionary, including the underlying text search template and the option values.

\dFp[+] [ pattern ]
    Lists text search parsers. If pattern is specified, only parsers whose names match the pattern are shown. If the form \dFp+ is used, a full description of each parser is shown, including the underlying functions and the list of recognized token types.

\dFt[+] [ pattern ]
    Lists text search templates. If pattern is specified, only templates whose names match the pattern are shown. If the form \dFt+ is used, additional information is shown about each template, including the underlying function names.

\dg[+] [ pattern ]
    Lists database roles. If pattern is specified, only those roles whose names match the pattern are listed. (This command is now effectively the same as \du). If the form \dg+ is used, additional information is shown about each role, including the comment for each role.

\dl
    This is an alias for \lo_list, which shows a list of large objects.

\dL[S+] [ pattern ]
    Lists procedural languages. If pattern is specified, only languages whose names match the pattern are listed. By default, only user-created languages are shown; supply the S modifier to include system objects. If + is appended to the command name, each language is listed with its call handler, validator, access privileges, and whether it is a system object.

\dn[S+] [ pattern ]
    Lists schemas (namespaces). If pattern is specified, only schemas whose names match the pattern are listed. By default, only user-created objects are shown; supply a pattern or the S modifier to include system objects. If + is appended to the command name, each object is listed with its associated permissions and description, if any.

\do[S] [ pattern ]
    Lists operators with their operand and return types. If pattern is specified, only operators whose names match the pattern are listed. By default, only user-created objects are shown; supply a pattern or the S modifier to include system objects.

\dO[S+] [ pattern ]
    Lists collations. If pattern is specified, only collations whose names match the pattern are listed. By default, only user-created objects are shown; supply a pattern or the S modifier to include system objects. If + is appended to the command name, each collation is listed with its associated description, if any. Note that only collations usable with the current database's encoding are shown, so the results may vary in different databases of the same installation.

\dp [ pattern ]
    Lists tables, views and sequences with their associated access privileges. If pattern is specified, only tables, views and sequences whose names match the pattern are listed.

    The GRANT(7) and REVOKE(7) commands are used to set access privileges. The meaning of the privilege display is explained under GRANT(7).

\drds [ role-pattern [ database-pattern ] ]
    Lists defined configuration settings. These settings can be role-specific, database-specific, or both. role-pattern and database-pattern are used to select specific roles and databases to list, respectively. If omitted, or if * is specified, all settings are listed, including those not role-specific or database-specific, respectively.

    The ALTER ROLE (ALTER_ROLE(7)) and ALTER DATABASE (ALTER_DATABASE(7)) commands are used to define per-role and per-database configuration settings.

\dT[S+] [ pattern ]
    Lists data types. If pattern is specified, only types whose names match the pattern are listed. If + is appended to the command name, each type is listed with its internal name and size, as well as its allowed values if it is an enum type. By default, only user-created objects are shown; supply a pattern or the S modifier to include system objects.

\du[+] [ pattern ]
    Lists database roles. If pattern is specified, only those roles whose names match the pattern are listed. If the form \du+ is used, additional information is shown about each role, including the comment for each role.

\dx[+] [ pattern ]
    Lists installed extensions. If pattern is specified, only those extensions whose names match the pattern are listed. If the form \dx+ is used, all the objects belonging to each matching extension are listed.

\e or \edit [ filename ] [ line_number ]
    If filename is specified, the file is edited; after the editor exits, its content is copied back to the query buffer. If no filename is given, the current query buffer is copied to a temporary file which is then edited in the same fashion.

    The new query buffer is then re-parsed according to the normal rules of psql, where the whole buffer is treated as a single line. (Thus you cannot make scripts this way. Use \i for that.) This means that if the query ends with (or contains) a semicolon, it is immediately executed. Otherwise it will merely wait in the query buffer; type semicolon or \g to send it, or \r to cancel.

    If a line number is specified, psql will position the cursor on the specified line of the file or query buffer. Note that if a single all-digits argument is given, psql assumes it is a line number, not a file name.

        Tip
        See under ENVIRONMENT for how to configure and customize your editor.

\echo text [ ... ]
    Prints the arguments to the standard output, separated by one space and followed by a newline. This can be useful to intersperse information in the output of scripts. For example:

        => \echo `date`
        Tue Oct 26 21:40:57 CEST 1999

    If the first argument is an unquoted -n the trailing newline is not written.

        Tip
        If you use the \o command to redirect your query output you might wish to use \qecho instead of this command.

\ef [ function_description [ line_number ] ]
    This command fetches and edits the definition of the named function, in the form of a CREATE OR REPLACE FUNCTION command. Editing is done in the same way as for \edit. After the editor exits, the updated command waits in the query buffer; type semicolon or \g to send it, or \r to cancel.

    The target function can be specified by name alone, or by name and arguments, for example foo(integer, text). The argument types must be given if there is more than one function of the same name.

    If no function is specified, a blank CREATE FUNCTION template is presented for editing.

    If a line number is specified, psql will position the cursor on the specified line of the function body. (Note that the function body typically does not begin on the first line of the file.)

        Tip
        See under ENVIRONMENT for how to configure and customize your editor.

\encoding [ encoding ]
    Sets the client character set encoding. Without an argument, this command shows the current encoding.

\f [ string ]
    Sets the field separator for unaligned query output. The default is the vertical bar (|). See also \pset for a generic way of setting output options.

\g [ filename ], \g [ |command ]
    Sends the current query input buffer to the server, and optionally stores the query's output in filename or pipes the output to the shell command command. A bare \g is virtually equivalent to a semicolon. A \g with argument is a “one-shot” alternative to the \o command.

\h or \help [ command ]
    Gives syntax help on the specified SQL command. If command is not specified, then psql will list all the commands for which syntax help is available. If command is an asterisk (*), then syntax help on all SQL commands is shown.

        Note
        To simplify typing, commands that consists of several words do not have to be quoted. Thus it is fine to type \help alter table.

\H or \html
    Turns on HTML query output format. If the HTML format is already on, it is switched back to the default aligned text format. This command is for compatibility and convenience, but see \pset about setting other output options.

\i or \include filename
    Reads input from the file filename and executes it as though it had been typed on the keyboard.

    If filename is - (hyphen), then standard input is read until an EOF indication or \q meta-command. This can be used to intersperse interactive input with input from files. Note that Readline behavior will be used only if it is active at the outermost level.

        Note
        If you want to see the lines on the screen as they are read you must set the variable ECHO to all.

\l (or \list), \l+ (or \list+)
    List the names, owners, character set encodings, and access privileges of all the databases in the server. If + is appended to the command name, database sizes, default tablespaces, and descriptions are also displayed. (Size information is only available for databases that the current user can connect to.)

\lo_export loid filename
    Reads the large object with OIDloid from the database and writes it to filename. Note that this is subtly different from the server function lo_export, which acts with the permissions of the user that the database server runs as and on the server's file system.

        Tip
        Use \lo_list to find out the large object's OID.

\lo_import filename [ comment ]
    Stores the file into a PostgreSQL large object. Optionally, it associates the given comment with the object. Example:

        foo=> \lo_import '/home/peter/pictures/photo.xcf' 'a picture of me'
        lo_import 152801

    The response indicates that the large object received object ID 152801, which can be used to access the newly-created large object in the future. For the sake of readability, it is recommended to always associate a human-readable comment with every object. Both OIDs and comments can be viewed with the \lo_list command.

    Note that this command is subtly different from the server-side lo_import because it acts as the local user on the local file system, rather than the server's user and file system.

\lo_list
    Shows a list of all PostgreSQL large objects currently stored in the database, along with any comments provided for them.

\lo_unlink loid
    Deletes the large object with OIDloid from the database.

        Tip
        Use \lo_list to find out the large object's OID.

\o or \out [ filename ], \o or \out [ |command ]
    Arranges to save future query results to the file filename or pipe future results to the shell command command. If no argument is specified, the query output is reset to the standard output.

    “Query results” includes all tables, command responses, and notices obtained from the database server, as well as output of various backslash commands that query the database (such as \d), but not error messages.

        Tip
        To intersperse text output in between query results, use \qecho.

\p or \print
    Print the current query buffer to the standard output.

\password [ username ]
    Changes the password of the specified user (by default, the current user). This command prompts for the new password, encrypts it, and sends it to the server as an ALTER ROLE command. This makes sure that the new password does not appear in cleartext in the command history, the server log, or elsewhere.

\prompt [ text ] name
    Prompts the user to set variable name. An optional prompt, text, can be specified. (For multiword prompts, use single quotes.)

    By default, \prompt uses the terminal for input and output. However, if the -f command line switch is used, \prompt uses standard input and standard output.

\pset option [ value ]
    This command sets options affecting the output of query result tables. option indicates which option is to be set. The semantics of value vary depending on the selected option. For some options, omitting value causes the option to be toggled or unset, as described under the particular option. If no such behavior is mentioned, then omitting value just results in the current setting being displayed.

    Adjustable printing options are:

    border
        The value must be a number. In general, the higher the number the more borders and lines the tables will have, but this depends on the particular format. In HTML format, this will translate directly into the border=... attribute; in the other formats only values 0 (no border), 1 (internal dividing lines), and 2 (table frame) make sense.

    columns
        Sets the target width for the wrapped format, and also the width limit for determining whether output is wide enough to require the pager. Zero (the default) causes the target width to be controlled by the environment variable COLUMNS, or the detected screen width if COLUMNS is not set. In addition, if columns is zero then the wrapped format only affects screen output. If columns is nonzero then file and pipe output is wrapped to that width as well.

    expanded (or x)
        If value is specified it must be either on or off which will enable or disable expanded mode. If value is omitted the command toggles between regular and expanded mode. When expanded mode is enabled, query results are displayed in two columns, with the column name on the left and the data on the right. This mode is useful if the data wouldn't fit on the screen in the normal “horizontal” mode.

    fieldsep
        Specifies the field separator to be used in unaligned output format. That way one can create, for example, tab- or comma-separated output, which other programs might prefer. To set a tab as field separator, type \pset fieldsep '\t'. The default field separator is '|' (a vertical bar).

    footer
        If value is specified it must be either on or off which will enable or disable display of the table footer (the (n rows) count). If value is omitted the command toggles footer display on or off.

    format
        Sets the output format to one of unaligned, aligned, wrapped, html, latex, or troff-ms. Unique abbreviations are allowed. (That would mean one letter is enough.)

        unaligned format writes all columns of a row on one line, separated by the currently active field separator. This is useful for creating output that might be intended to be read in by other programs (for example, tab-separated or comma-separated format).

        aligned format is the standard, human-readable, nicely formatted text output; this is the default.

        wrapped format is like aligned but wraps wide data values across lines to make the output fit in the target column width. The target width is determined as described under the columns option. Note that psql will not attempt to wrap column header titles; therefore, wrapped format behaves the same as aligned if the total width needed for column headers exceeds the target.

        The html, latex, and troff-ms formats put out tables that are intended to be included in documents using the respective mark-up language. They are not complete documents! (This might not be so dramatic in HTML, but in LaTeX you must have a complete document wrapper.)

    linestyle
        Sets the border line drawing style to one of ascii, old-ascii or unicode. Unique abbreviations are allowed. (That would mean one letter is enough.) The default setting is ascii. This option only affects the aligned and wrapped output formats.

        ascii style uses plain ASCII characters. Newlines in data are shown using a + symbol in the right-hand margin. When the wrapped format wraps data from one line to the next without a newline character, a dot (.) is shown in the right-hand margin of the first line, and again in the left-hand margin of the following line.

        old-ascii style uses plain ASCII characters, using the formatting style used in PostgreSQL 8.4 and earlier. Newlines in data are shown using a : symbol in place of the left-hand column separator. When the data is wrapped from one line to the next without a newline character, a ; symbol is used in place of the left-hand column separator.

        unicode style uses Unicode box-drawing characters. Newlines in data are shown using a carriage return symbol in the right-hand margin. When the data is wrapped from one line to the next without a newline character, an ellipsis symbol is shown in the right-hand margin of the first line, and again in the left-hand margin of the following line.

        When the border setting is greater than zero, this option also determines the characters with which the border lines are drawn. Plain ASCII characters work everywhere, but Unicode characters look nicer on displays that recognize them.

    null
        Sets the string to be printed in place of a null value. The default is to print nothing, which can easily be mistaken for an empty string. For example, one might prefer \pset null '(null)'.

    numericlocale
        If value is specified it must be either on or off which will enable or disable display of a locale-specific character to separate groups of digits to the left of the decimal marker. If value is omitted the command toggles between regular and locale-specific numeric output.

    pager
        Controls use of a pager program for query and psql help output. If the environment variable PAGER is set, the output is piped to the specified program. Otherwise a platform-dependent default (such as more) is used.

        When the pager option is off, the pager program is not used. When the pager option is on, the pager is used when appropriate, i.e., when the output is to a terminal and will not fit on the screen. The pager option can also be set to always, which causes the pager to be used for all terminal output regardless of whether it fits on the screen. \pset pager without a value toggles pager use on and off.

    recordsep
        Specifies the record (line) separator to use in unaligned output format. The default is a newline character.

    tableattr (or T)
        Specifies attributes to be placed inside the HTMLtable tag in html output format. This could for example be cellpadding or bgcolor. Note that you probably don't want to specify border here, as that is already taken care of by \pset border. If no value is given, the table attributes are unset.

    title
        Sets the table title for any subsequently printed tables. This can be used to give your output descriptive tags. If no value is given, the title is unset.

    tuples_only (or t)
        If value is specified it must be either on or off which will enable or disable tuples-only mode. If value is omitted the command toggles between regular and tuples-only output. Regular output includes extra information such as column headers, titles, and various footers. In tuples-only mode, only actual table data is shown.

    Illustrations of how these different formats look can be seen in the EXAMPLES section.

        Tip
        There are various shortcut commands for \pset. See \a, \C, \H, \t, \T, and \x.

        Note
        It is an error to call \pset without any arguments. In the future this case might show the current status of all printing options.

\q or \quit
    Quits the psql program. In a script file, only execution of that script is terminated.

\qecho text [ ... ]
    This command is identical to \echo except that the output will be written to the query output channel, as set by \o.

\r or \reset
    Resets (clears) the query buffer.

\s [ filename ]
    Print psql's command line history to filename. If filename is omitted, the history is written to the standard output (using the pager if appropriate). This command is not available if psql was built without Readline support.

\set [ name [ value [ ... ] ] ]
    Sets the internal variable name to value or, if more than one value is given, to the concatenation of all of them. If no second argument is given, the variable is just set with no value. To unset a variable, use the \unset command.

    Valid variable names can contain characters, digits, and underscores. See the section Variables below for details. Variable names are case-sensitive.

    Although you are welcome to set any variable to anything you want, psql treats several variables as special. They are documented in the section about variables.

        Note
        This command is totally separate from the SQL command SET(7).

\sf[+] function_description
    This command fetches and shows the definition of the named function, in the form of a CREATE OR REPLACE FUNCTION command. The definition is printed to the current query output channel, as set by \o.

    The target function can be specified by name alone, or by name and arguments, for example foo(integer, text). The argument types must be given if there is more than one function of the same name.

    If + is appended to the command name, then the output lines are numbered, with the first line of the function body being line 1.

\t
    Toggles the display of output column name headings and row count footer. This command is equivalent to \pset tuples_only and is provided for convenience.

\T table_options
    Specifies attributes to be placed within the table tag in HTML output format. This command is equivalent to \pset tableattr table_options.

\timing [ on | off ]
    Without parameter, toggles a display of how long each SQL statement takes, in milliseconds. With parameter, sets same.

\w or \write filename, \w or \write |command
    Outputs the current query buffer to the file filename or pipes it to the shell command command.

\x
    Toggles expanded table formatting mode. As such it is equivalent to \pset expanded.

\z [ pattern ]
    Lists tables, views and sequences with their associated access privileges. If a pattern is specified, only tables, views and sequences whose names match the pattern are listed.

    This is an alias for \dp (“display privileges”).

\! [ command ]
    Escapes to a separate shell or executes the shell command command. The arguments are not further interpreted; the shell will see them as-is.

\?
    Shows help information about the backslash commands.

Patterns

    The various \d commands accept a pattern parameter to specify the object name(s) to be displayed. In the simplest case, a pattern is just the exact name of the object. The characters within a pattern are normally folded to lower case, just as in SQL names; for example, \dt FOO will display the table named foo. As in SQL names, placing double quotes around a pattern stops folding to lower case. Should you need to include an actual double quote character in a pattern, write it as a pair of double quotes within a double-quote sequence; again this is in accord with the rules for SQL quoted identifiers. For example, \dt "FOO""BAR" will display the table named FOO"BAR (not foo"bar). Unlike the normal rules for SQL names, you can put double quotes around just part of a pattern, for instance \dt FOO"FOO"BAR will display the table named fooFOObar.

    Whenever the pattern parameter is omitted completely, the \d commands display all objects that are visible in the current schema search path — this is equivalent to using * as the pattern. (An object is said to be visible if its containing schema is in the search path and no object of the same kind and name appears earlier in the search path. This is equivalent to the statement that the object can be referenced by name without explicit schema qualification.) To see all objects in the database regardless of visibility, use *.* as the pattern.

    Within a pattern, * matches any sequence of characters (including no characters) and ? matches any single character. (This notation is comparable to Unix shell file name patterns.) For example, \dt int* displays tables whose names begin with int. But within double quotes, * and ? lose these special meanings and are just matched literally.

    A pattern that contains a dot (.) is interpreted as a schema name pattern followed by an object name pattern. For example, \dt foo*.*bar* displays all tables whose table name includes bar that are in schemas whose schema name starts with foo. When no dot appears, then the pattern matches only objects that are visible in the current schema search path. Again, a dot within double quotes loses its special meaning and is matched literally.

    Advanced users can use regular-expression notations such as character classes, for example [0-9] to match any digit. All regular expression special characters work as specified in Section 9.7.3, “POSIX Regular Expressions”, in the documentation, except for . which is taken as a separator as mentioned above, * which is translated to the regular-expression notation .*, ? which is translated to ., and $ which is matched literally. You can emulate these pattern characters at need by writing ? for ., (R+|) for R*, or (R|) for R?. $ is not needed as a regular-expression character since the pattern must match the whole name, unlike the usual interpretation of regular expressions (in other words, $ is automatically appended to your pattern). Write * at the beginning and/or end if you don't wish the pattern to be anchored. Note that within double quotes, all regular expression special characters lose their special meanings and are matched literally. Also, the regular expression special characters are matched literally in operator name patterns (i.e., the argument of \do).

  Advanced Features

Variables

    psql provides variable substitution features similar to common Unix command shells. Variables are simply name/value pairs, where the value can be any string of any length. To set variables, use the psql meta-command \set:

        testdb=> \set foo bar

    sets the variable foo to the value bar. To retrieve the content of the variable, precede the name with a colon and use it as the argument of any slash command:

        testdb=> \echo :foo
        bar

        Note

        The arguments of \set are subject to the same substitution rules as with other commands. Thus you can construct interesting references such as \set :foo 'something' and get “soft links” or “variable variables” of Perl or PHP fame, respectively. Unfortunately (or fortunately?), there is no way to do anything useful with these constructs. On the other hand, \set bar :foo is a perfectly valid way to copy a variable.

    If you call \set without a second argument, the variable is set, with an empty string as value. To unset (or delete) a variable, use the command \unset.

    psql's internal variable names can consist of letters, numbers, and underscores in any order and any number of them. A number of these variables are treated specially by psql. They indicate certain option settings that can be changed at run time by altering the value of the variable or that represent some state of the application. Although you can use these variables for any other purpose, this is not recommended, as the program behavior might grow really strange really quickly. By convention, all specially treated variables consist of all upper-case letters (and possibly numbers and underscores). To ensure maximum compatibility in the future, avoid using such variable names for your own purposes. A list of all specially treated variables follows.

    AUTOCOMMIT
        When on (the default), each SQL command is automatically committed upon successful completion. To postpone commit in this mode, you must enter a BEGIN or START TRANSACTION SQL command. When off or unset, SQL commands are not committed until you explicitly issue COMMIT or END. The autocommit-off mode works by issuing an implicit BEGIN for you, just before any command that is not already in a transaction block and is not itself a BEGIN or other transaction-control command, nor a command that cannot be executed inside a transaction block (such as VACUUM).

            Note
            In autocommit-off mode, you must explicitly abandon any failed transaction by entering ABORT or ROLLBACK. Also keep in mind that if you exit the session without committing, your work will be lost.

            Note
            The autocommit-on mode is PostgreSQL's traditional behavior, but autocommit-off is closer to the SQL spec. If you prefer autocommit-off, you might wish to set it in the system-wide psqlrc file or your ~/.psqlrc file.

    DBNAME
        The name of the database you are currently connected to. This is set every time you connect to a database (including program start-up), but can be unset.

    ECHO
        If set to all, all nonempty input lines are printed to standard output as they are read. (This does not apply to lines read interactively.) To select this behavior on program start-up, use the switch -a. If set to queries, psql prints each query to standard output as it is sent to the server. The switch for this is -e.

    ECHO_HIDDEN
        When this variable is set to on and a backslash command queries the database, the query is first shown. This feature helps you to study PostgreSQL internals and provide similar functionality in your own programs. (To select this behavior on program start-up, use the switch -E.) If you set the variable to the value noexec, the queries are just shown but are not actually sent to the server and executed.

    ENCODING
        The current client character set encoding.

    FETCH_COUNT
        If this variable is set to an integer value > 0, the results of SELECT queries are fetched and displayed in groups of that many rows, rather than the default behavior of collecting the entire result set before display. Therefore only a limited amount of memory is used, regardless of the size of the result set. Settings of 100 to 1000 are commonly used when enabling this feature. Keep in mind that when using this feature, a query might fail after having already displayed some rows.

            Tip
            Although you can use any output format with this feature, the default aligned format tends to look bad because each group of FETCH_COUNT rows will be formatted separately, leading to varying column widths across the row groups. The other output formats work better.

    HISTCONTROL
        If this variable is set to ignorespace, lines which begin with a space are not entered into the history list. If set to a value of ignoredups, lines matching the previous history line are not entered. A value of ignoreboth combines the two options. If unset, or if set to any other value than those above, all lines read in interactive mode are saved on the history list.

            Note
            This feature was shamelessly plagiarized from Bash.

    HISTFILE
        The file name that will be used to store the history list. The default value is ~/.psql_history. For example, putting:

            \set HISTFILE ~/.psql_history- :DBNAME

        in ~/.psqlrc will cause psql to maintain a separate history for each database.

            Note
            This feature was shamelessly plagiarized from Bash.

    HISTSIZE
        The number of commands to store in the command history. The default value is 500.

            Note
            This feature was shamelessly plagiarized from Bash.

    HOST
        The database server host you are currently connected to. This is set every time you connect to a database (including program start-up), but can be unset.

    IGNOREEOF
        If unset, sending an EOF character (usually Control+D) to an interactive session of psql will terminate the application. If set to a numeric value, that many EOF characters are ignored before the application terminates. If the variable is set but has no numeric value, the default is 10.

            Note
            This feature was shamelessly plagiarized from Bash.

    LASTOID
        The value of the last affected OID, as returned from an INSERT or \lo_import command. This variable is only guaranteed to be valid until after the result of the next SQL command has been displayed.

    ON_ERROR_ROLLBACK
        When set to on, if a statement in a transaction block generates an error, the error is ignored and the transaction continues. When set to interactive, such errors are only ignored in interactive sessions, and not when reading script files. When unset or set to off, a statement in a transaction block that generates an error aborts the entire transaction. The error rollback mode works by issuing an implicit SAVEPOINT for you, just before each command that is in a transaction block, and then rolling back to the savepoint if the command fails.

    ON_ERROR_STOP
        By default, command processing continues after an error. When this variable is set to on, processing will instead stop immediately. In interactive mode, psql will return to the command prompt; otherwise, psql will exit, returning error code 3 to distinguish this case from fatal error conditions, which are reported using error code 1. In either case, any currently running scripts (the top-level script, if any, and any other scripts which it may have in invoked) will be terminated immediately. If the top-level command string contained multiple SQL commands, processing will stop with the current command.

    PORT
        The database server port to which you are currently connected. This is set every time you connect to a database (including program start-up), but can be unset.

    PROMPT1, PROMPT2, PROMPT3
        These specify what the prompts psql issues should look like. See Prompting below.

    QUIET
        Setting this variable to on is equivalent to the command line option -q. It is probably not too useful in interactive mode.

    SINGLELINE
        Setting this variable to on is equivalent to the command line option -S.

    SINGLESTEP
        Setting this variable to on is equivalent to the command line option -s.

    USER
        The database user you are currently connected as. This is set every time you connect to a database (including program start-up), but can be unset.

    VERBOSITY
        This variable can be set to the values default, verbose, or terse to control the verbosity of error reports.

SQL Interpolation

    An additional useful feature of psql variables is that you can substitute (“interpolate”) them into regular SQL statements. psql provides special facilities for ensuring that values used as SQL literals and identifiers are properly escaped. The syntax for interpolating a value without any special escaping is again to prepend the variable name with a colon (:):

        testdb=> \set foo 'my_table'
        testdb=> SELECT * FROM :foo;

    would then query the table my_table. Note that this may be unsafe: the value of the variable is copied literally, so it can even contain unbalanced quotes or backslash commands. You must make sure that it makes sense where you put it.

    When a value is to be used as an SQL literal or identifier, it is safest to arrange for it to be escaped. To escape the value of a variable as an SQL literal, write a colon followed by the variable name in single quotes. To escape the value an SQL identifier, write a colon followed by the variable name in double quotes. The previous example would be more safely written this way:

        testdb=> \set foo 'my_table'
        testdb=> SELECT * FROM :"foo";

    Variable interpolation will not be performed into quoted SQL entities.

    One possible use of this mechanism is to copy the contents of a file into a table column. First load the file into a variable and then proceed as above:

        testdb=> \set content `cat my_file.txt`
        testdb=> INSERT INTO my_table VALUES (:'content');

    (Note that this still won't work if my_file.txt contains NUL bytes. psql does not support embedded NUL bytes in variable values.)

    Since colons can legally appear in SQL commands, an apparent attempt at interpolation (such as :name, :'name', or :"name") is not changed unless the named variable is currently set. In any case, you can escape a colon with a backslash to protect it from substitution. (The colon syntax for variables is standard SQL for embedded query languages, such as ECPG. The colon syntax for array slices and type casts are PostgreSQL extensions, hence the conflict. The colon syntax for escaping a variable's value as an SQL literal or identifier is a psql extension.)

Prompting

    The prompts psql issues can be customized to your preference. The three variables PROMPT1, PROMPT2, and PROMPT3 contain strings and special escape sequences that describe the appearance of the prompt. Prompt 1 is the normal prompt that is issued when psql requests a new command. Prompt 2 is issued when more input is expected during command input because the command was not terminated with a semicolon or a quote was not closed. Prompt 3 is issued when you run an SQLCOPY command and you are expected to type in the row values on the terminal.

    The value of the selected prompt variable is printed literally, except where a percent sign (%) is encountered. Depending on the next character, certain other text is substituted instead. Defined substitutions are:

    %M
        The full host name (with domain name) of the database server, or [local] if the connection is over a Unix domain socket, or [local:/dir/name], if the Unix domain socket is not at the compiled in default location.

    %m
        The host name of the database server, truncated at the first dot, or [local] if the connection is over a Unix domain socket.

    %>
        The port number at which the database server is listening.

    %n
        The database session user name. (The expansion of this value might change during a database session as the result of the command SET SESSION AUTHORIZATION.)

    %/
        The name of the current database.

    %~
        Like %/, but the output is ~ (tilde) if the database is your default database.

    %#
        If the session user is a database superuser, then a #, otherwise a >. (The expansion of this value might change during a database session as the result of the command SET SESSION AUTHORIZATION.)

    %R
        In prompt 1 normally =, but ^ if in single-line mode, and ! if the session is disconnected from the database (which can happen if \connect fails). In prompt 2 the sequence is replaced by -, *, a single quote, a double quote, or a dollar sign, depending on whether psql expects more input because the command wasn't terminated yet, because you are inside a /* ... */ comment, or because you are inside a quoted or dollar-escaped string. In prompt 3 the sequence doesn't produce anything.

    %x
        Transaction status: an empty string when not in a transaction block, or * when in a transaction block, or ! when in a failed transaction block, or ? when the transaction state is indeterminate (for example, because there is no connection).

    %digits
        The character with the indicated octal code is substituted.

    %:name:
        The value of the psql variable name. See the section Variables for details.

    %`command`
        The output of command, similar to ordinary “back-tick” substitution.

    %[ ... %]
        Prompts can contain terminal control characters which, for example, change the color, background, or style of the prompt text, or change the title of the terminal window. In order for the line editing features of Readline to work properly, these non-printing control characters must be designated as invisible by surrounding them with %[ and %]. Multiple pairs of these can occur within the prompt. For example:

            testdb=> \set PROMPT1 '%[%033[1;33;40m%]%n@%/%R%[%033[0m%]%# '

        results in a boldfaced (1;) yellow-on-black (33;40) prompt on VT100-compatible, color-capable terminals.
    To insert a percent sign into your prompt, write %%. The default prompts are '%/%R%# ' for prompts 1 and 2, and '>> ' for prompt 3.

        Note

        This feature was shamelessly plagiarized from tcsh.

Command-Line Editing

    psql supports the Readline library for convenient line editing and retrieval. The command history is automatically saved when psql exits and is reloaded when psql starts up. Tab-completion is also supported, although the completion logic makes no claim to be an SQL parser. If for some reason you do not like the tab completion, you can turn it off by putting this in a file named .inputrc in your home directory:

        $if psql
        set disable-completion on
        $endif

    (This is not a psql but a Readline feature. Read its documentation for further details.)

ENVIRONMENT

COLUMNS
    If \pset columns is zero, controls the width for the wrapped format and width for determining if wide output requires the pager.

PAGER
    If the query results do not fit on the screen, they are piped through this command. Typical values are more or less. The default is platform-dependent. The use of the pager can be disabled by using the \pset command.

PGDATABASE, PGHOST, PGPORT, PGUSER
    Default connection parameters (see Section 31.13, “Environment Variables”, in the documentation).

PSQL_EDITOR, EDITOR, VISUAL
    Editor used by the \e and \ef commands. The variables are examined in the order listed; the first that is set is used.

    The built-in default editors are vi on Unix systems and notepad.exe on Windows systems.

PSQL_EDITOR_LINENUMBER_ARG
    When \e or \ef is used with a line number argument, this variable specifies the command-line argument used to pass the starting line number to the user's editor. For editors such as Emacs or vi, this is a plus sign. Include a trailing space in the value of the variable if there needs to be space between the option name and the line number. Examples:

        PSQL_EDITOR_LINENUMBER_ARG='+'
        PSQL_EDITOR_LINENUMBER_ARG='--line '

    The default is + on Unix systems (corresponding to the default editor vi, and useful for many other common editors); but there is no default on Windows systems.

SHELL
    Command executed by the \! command.

TMPDIR
    Directory for storing temporary files. The default is /tmp.

This utility, like most other PostgreSQL utilities, also uses the environment variables supported by libpq (see Section 31.13, “Environment Variables”, in the documentation).

FILES

    • Unless it is passed an -X or -c option, psql attempts to read and execute commands from the system-wide psqlrc file and the user's ~/.psqlrc file before starting up. (On Windows, the user's startup file is named %APPDATA%\postgresql\psqlrc.conf.) See PREFIX/share/psqlrc.sample for information on setting up the system-wide file. It could be used to set up the client or the server to taste (using the \set and SET commands).

    • Both the system-wide psqlrc file and the user's ~/.psqlrc file can be made version-specific by appending a dash and the PostgreSQL release number, for example ~/.psqlrc-9.1.21. A matching version-specific file will be read in preference to a non-version-specific file.

    • The command-line history is stored in the file ~/.psql_history, or %APPDATA%\postgresql\psql_history on Windows.

NOTES

    • In an earlier life psql allowed the first argument of a single-letter backslash command to start directly after the command, without intervening whitespace. As of PostgreSQL 8.4 this is no longer allowed.

    • psql is only guaranteed to work smoothly with servers of the same version. That does not mean other combinations will fail outright, but subtle and not-so-subtle problems might come up. Backslash commands are particularly likely to fail if the server is of a newer version than psql itself. However, backslash commands of the \d family should work with servers of versions back to 7.4, though not necessarily with servers newer than psql itself.

NOTES FOR WINDOWS USERS

psql is built as a “console application”. Since the Windows console windows use a different encoding than the rest of the system, you must take special care when using 8-bit characters within psql. If psql detects a problematic console code page, it will warn you at startup. To change the console code page, two things are necessary:

    • Set the code page by entering cmd.exe /c chcp 1252. (1252 is a code page that is appropriate for German; replace it with your value.) If you are using Cygwin, you can put this command in /etc/profile.

    • Set the console font to Lucida Console, because the raster font does not work with the ANSI code page.

EXAMPLES

The first example shows how to spread a command over several lines of input. Notice the changing prompt:

    testdb=> CREATE TABLE my_table (
    testdb(>  first integer not null default 0,
    testdb(>  second text)
    testdb-> ;
    CREATE TABLE

Now look at the table definition again:

    testdb=> \d my_table
                 Table "my_table"
     Attribute |  Type   |      Modifier
    -----------+---------+--------------------
     first     | integer | not null default 0
     second    | text    |

Now we change the prompt to something more interesting:

    testdb=> \set PROMPT1 '%n@%m %~%R%# '
    peter@localhost testdb=>

Let's assume you have filled the table with data and want to take a look at it:

    peter@localhost testdb=> SELECT * FROM my_table;
     first | second
    -------+--------
         1 | one
         2 | two
         3 | three
         4 | four
    (4 rows)

You can display tables in different ways by using the \pset command:

    peter@localhost testdb=> \pset border 2
    Border style is 2.
    peter@localhost testdb=> SELECT * FROM my_table;
    +-------+--------+
    | first | second |
    +-------+--------+
    |     1 | one    |
    |     2 | two    |
    |     3 | three  |
    |     4 | four   |
    +-------+--------+
    (4 rows)
    peter@localhost testdb=> \pset border 0
    Border style is 0.
    peter@localhost testdb=> SELECT * FROM my_table;
    first second
    ----- ------
        1 one
        2 two
        3 three
        4 four
    (4 rows)
    peter@localhost testdb=> \pset border 1
    Border style is 1.
    peter@localhost testdb=> \pset format unaligned
    Output format is unaligned.
    peter@localhost testdb=> \pset fieldsep ","
    Field separator is ",".
    peter@localhost testdb=> \pset tuples_only
    Showing only tuples.
    peter@localhost testdb=> SELECT second, first FROM my_table;
    one,1
    two,2
    three,3
    four,4

Alternatively, use the short commands:

    peter@localhost testdb=> \a \t \x
    Output format is aligned.
    Tuples only is off.
    Expanded display is on.
    peter@localhost testdb=> SELECT * FROM my_table;
    -[ RECORD 1 ]-
    first  | 1
    second | one
    -[ RECORD 2 ]-
    first  | 2
    second | two
    -[ RECORD 3 ]-
    first  | 3
    second | three
    -[ RECORD 4 ]-
    first  | 4
    second | four